Rocker Arm Cover - TM-10-3930-638-24-P0565

TM 10-3930-638-24&P

3 - 5 . ENGINE MAINTENANCE (cont)

i. Rocker Arm Cover.

This task covers: a. Removal

d. Repair

b. Cleaning

e. Installation

c. Inspection

INITIAL SETUP

TOOLS

EQUIPMENT CONDITION

Automotive Mechanic's

NSN 5180-00-754-0641

Paragraph

Condition Description

Tool Kit

Vehicle parked on level surface, engine

off, and parking brake applied.

MATERIALS PARTS

2-53d

Top hood removed.

Cleaning solvent P-D-680

Clean cloths

Gasket

Hose, 44 0.5 inches long

(FSCM 24161 P/N

IFBRBRDLPBLKSYNRBRHYDHSE3-4ID)

ITEM

STEP

LOCATION

REMARKS

ACTION

REMOVAL

Engine compart-

a. Clamp (1)

Loosen

ment, top

b. Breather hose (2)

Disconnect

From elbow (8)

d. Two nuts (3), washers

Remove

(4) and grommets (5)

d. Rocker arm cover (6)

Lift and remove

From engine cylinder head

e. Gasket (7)

Remove and

discard

Rocker arm

Breather elbow (8)

Remove

From rocker arm cover (6)

cover (6)

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or

excessive heat and don't smoke when using it. Failure to do so

could cause serious injury. If you become dizzy while using

cleaning solvent, get fresh air immediately, and get medical

attention. If contact with skin or clothes is made, flush with large

amounts of water. If contact with eyes is made, wash eyes with

water immediately, and obtain medical aid immediately.

WARNING

Wear safety glasses when drying parts with compressed air.

Failure to do so could cause serious injury to eyes and possible

blindness. If you hurt your eyes or if a foreign object is blown into

your eyes, seek medical attention immediately.

3-59