 |
|||
|
|
|||
|
Page Title:
Separation of Engine and Transmission (cont). |
|
||
| ||||||||||
|
|
 TM 10-3930-638-24&P
3-5. ENGINE MAINTENANCE (cont)
d. Separation of Engine and Transmission (cont).
ITEM
STEP
LOCATION
ACTION
REMARKS
[INSTALLATION
a. One guide stud
In a lower flex plate nut
4
Transmission
Install
b. Flex plate
Rotate
Until guide stud is at bottom center of
transmission
Until flex plate cap screw hole is aligned
a. Flywheel
Flywheel housing
Rotate
5
with guide stud at bottom of transmission
b. Two studs (9)
If removed
Install and
tighten
Against engine flywheel housing. Align
c. Transmission
Position
guide stud with flywheel, and studs (9)
and transmission housing
d. Two lock washers (8)
Install
and nuts (6)
e. Ten lock washers (8)
Install
and cap screws (7)
f. Eight cap screws (5)
Rotate flywheel and flex plate and install
Install and
at least one cap screw before removing
tighten
guide stud. After all eight cap screws
are snug, rotate flywheel and flex plate
and tighten to 25-30 pounds foot torque
g. Nuts (6) and cap
Until transmission is securely mounted
Tighten
screws (7)
h. Dust cover (4)
On flywheel housing
Position
i. Three washers (3), lock
Install and
Until cover (4) is securely mounted
washers (2) and cap
tighten
screws (1)
From transmission
Remove
j. Transmission supports
and hard ware
3-48
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals