Engine Mount (cont). - TM-10-3930-638-24-P0546

TM 10-3930-638-24&P

3-5. ENGINE MAINTENANCE (cont)

b. Engine Mount (cont).

ITEM

REMARKS

ACTION

STEP

LOCATION

CLEANING (cont)

Washers (2, 3 and 5)

Clean

Use cleaning solvent P-D-680. Dry

cap screw (4) and engine

thoroughly with compressed air or clean

cloths

mount bracket

INSPECTION

Washers (2, 3 and 5) and

Inspect

Replace if worn, or if threads damaged

cap screw (4)

INSTALLATION/REPLACEMENT

Engine, rear

a. New mount (6) and

Lubricate

Use rubber lubricant or liquid soap

hole in engine mount

bracket

CAUTION

Do not attempt to install mount (6) using hammer. Driving

mount into engine mount bracket may damage rubber.

b. Mount (6)

Install

Using hardware shown below, pull mount

until it is seated against engine mount

bracket, then remove hardware

3-40