Removal and Installation (cont). - TM-10-3930-638-24-P0505

TM 10-3930-638-24&P

2-56. HYDRAULIC LIFT SYSTEM MAINTENANCE (cont)

g. Hydraulic Reservoir (cont).

(5) Removal and Installation (cont).

ITEM

REMARKS

LOCATION

ACTION

STEP

CLEANING

WARNING

Dry cleaning solvent (P-D-680). used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immed-

iately, and obtain medical aid immediately.

Use cleaning solvent P-D-680

Hydraulic reservoir (20)

Clean exterior

Hydraulic reservoir (20)

Use steam

Clean interior

INSPECTION

Inspect

Check for cracks, breaks, dents and

Hydraulic reservoir (20)

corrosion

Hammer out

Hydraulic

a. Dents

reservoir

WARNING

When welding hydraulic reservoir, partially fill it with water.

Failure to do so may cause serious injury or death.

Weld

b. Cracks, breaks, leaks,

or corrosion damage

INSTALLATION/REPLACEMENT

Rear chassis,

Hydraulic reservoir (20)

position, remove chain

hoist. Slide into

front

position until

mounting holes

are aligned

2-453