Hydraulic Oil Filter Assembly to Control Valve to Mast Assembly (cont).

TM 10-3930-638-24&P

2-56. HYDRAULIC LIFT SYSTEM MAINTENANCE (cont)

f. Hoses, Lines and Fittings (cont).

(1) Hydraulic Oil Filter Assembly to Control Valve to Mast Assembly (cont).

ITEM

REMARKS

ACTION

LOCATION

STEP

INSTALLATION/REPLACEMENT (cont)

Position between

a. Tube assembly (75)

Engine compart-

oil filter head

ment, front

and front of rear

chassis

Connect to oil

b. Tube fitting (74)

filter head and

tighten

Position on tube

a. Clamp (73)

Rear chassis,

assembly (75)

front

Secures clamp (73) to chassis

Install

b. Cap screw (69)

Install

Secures screw and clamp to chassis

c. Washer (72), lock

washer (71), and

nut (70)

Position between

d. Hose assembly (68)

tube assembly

(75) and tee

located on relief

valve

Connect to hose

e. Tube fitting (67)

(68) and tighten

Position on hose

a. Clamp (66)

Front chassis,

assembly (68)

bottom right

Secures clamp (66) to chassis

Install

b. Cap screw (62)

side

Install

Secures screw and clamp to chassis

c. Washer (65), lock

washer (64), and nut

(63)

Connect to tee

d. Hose fitting

located on relief

valve. Tighten

Position between

e. Hose assembly (60)

tee located on

relief valve and

operator's

compartment

f. Clamp (59)

Position on hose

(60) and secure

to right side of

accelerator

pivot base

g. Hose fitting (58)

Connect to tee

located on relief

valve and

tighten

2-425