Chassis floor Plate and Guard (cont). - TM-10-3930-638-24-P0425

TM 10-3930-638-24&P

2-53. BODY, CAB AND HOOD MAINTENANCE (cont)

i. Chassis floor Plate and Guard (cont).

REMARKS

ITEM

ACTION

LOCATION

STEP

REMOVAL

Support guard (5)

a. Four nuts (I), washers

Loosen and

Bottom of front

(2 and 3) and cap

remove

chassis

screws (4)

Grasp handles and lower from vehicle

b. Guard (5)

Remove

a. Six cap screws (6),

Operator's com-

Loosen and

remove

lock washers (7),

partment floor

and washers (8)

b. Chassis floor plate (9)

Remove

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immed-

iately, and obtain medical aid immediately.

WARNING

Wear safety glasses when drying parts with compressed air. Failure

to do so could cause serious injury to eyes and possible blindness.

If you hurt your eyes or if a foreign object is blown into your eyes,

seek medical attention immediately.

Use cleaning solvent P-D-680. Dry

All parts

Clean

thoroughly with compressed air

2-387