Front Cover Panel (cont). - TM-10-3930-638-24-P0418

TM 10-3930-638-24&P

2-53. BODY, CAB AND HOOD MAINTENANCE (cont)

f. Front Cover Panel (cont).

REMARKS

ITEM

ACTION

STEP

LOCATION

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately. and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immed-

iately, and obtain medical aid immediately.

All parts

Clean

Use cleaning solvent P-D-680. Dry

thoroughly. Remove rust using stiff

wire brush

INSPECTION

Inspect

All parts

Replace if cracked, damaged, broken,

bent, distorted, missing or damaged

threads

INSTALLATION

a. Flange mounted

Position on panel

Operator's com-

(5)

partment

bearing (9)

b. Two cap screws (8),

Install

lock washers (7),

and nuts (6)

c. Front cover panel (5)

Position

d. Dipstick tube assembly

Connect to panel

(5) tube

hose

e. Clamp (4)

Tighten

f. Six washers (3), lock

Install

washers (2), and cap

screws (1)

g. Dipstick

Install

h. Axle disconnect lever

Install

knob

2-380