Steering Gear to Steering Cylinder Assemblies (cont).

TM 10-3930-638-24&P

2-48. STEERING SYSTEM MAINTENANCE (cont)

b. Hoses, Lines and Fittings (cont).

(1) Steering Gear to Steering Cylinder Assemblies (cont).

ITEM

STEP

LOCATION

ACTION

REMARKS

INSTALLATION/REPLACEMENT (cont)

c. Tube fitting (11)

Connect to

bottom union

(cont)

(14) and tighten

d. Tube fitting ( 10)

Connect to top

union (14) and

tighten

Front chassis. a. Two elbows (9)

Install

b. Two steering supply

Position

sides

hoses (8)

c. Four hose fittings (7)

Connect to

bottom union

(14 and 57) and

elbow (9); tighten

d. Two elbows (6)

Install

e. Two steering supply

Position

hoses (5)

f. Four hose fittings (4)

Connect to elbow

(6) and top

union (14 and

57); tighten

Position

g. Two steering cylinder

guards (3)

Thread through

h. Four hose clamps (2)

guard (3) and

around cylinder;

tighten

i. Two tie straps ( 1 )

Install around

hoses (5 and 8)

and tie

Check level and

Hydraulic reservoir Oil level dipstick and fill

add if necessary

a. Start engine and operate at idle speed while turning steering

Operator's

wheel to extreme right and left several times

compartment

b. Increase engine speed and operate shift control lever to shift

forks right and left several times

c. Operate engine at idle speed and check for oil leaks at

connections

d. Turn engine off

e. Check hydraulic reservoir oil level (step 32)

2-339