WHEELS AND TIRES MAINTENANCE (cont) - TM-10-3930-638-24-P0364

TM 10-3930-638-24&P

2 - 4 7 . WHEELS AND TIRES MAINTENANCE (cont)

REMARKS

ACTION

ITEM

LOCATION

STEP

REMOVAL

Tire and wheel

a. Six stud nuts ( I

Remove

to be removed

Remove to work

b. Tire and wheel

area

DISASSEMBLY

a. Valve cap (2)

Remove

To deflate fire

Remove

b. Valve core (3)

Refer to TM 9-2610-200-24 for

Deflate and

c. Tire (4)

remounting procedures.

remove

Remove

d. Extension valve (5)

e. Air valve (6)

Remove

CLEANING

Dry cleaning solvent (P-D-680). used to clean parts is toxic and

flammable. Wear projective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin. eyes. and clothes

and don't breathe vapors. Do not use near open flame or

excessive heat and don't smoke when using it. Failure to do so

could cause serious Injury. If you become dizzly while using

cleaning solvent, get fresh air immediately, and get medical

attention. If contact with skin or clothes iS made. flush with large

amounts of water. If contact with eyes is made. wash eyes with

water immediately. and obtain medical aid immediately.

Wheel (7)

Use cleasning solvent P-D-680: use wire

Clean

brush to remove rust. corrosion or old

rubber

INSPECTION

Stud nuts (1)

Inspect

Replace if cracked. distorted. or threads

damaged

Air valve (6). valve cap (2).

Inspect

Replace if bent. distorted. cracked, or

extension valve (5), and

threads damaged

valve core (3)

Tire (4)

Replace if casing damaged or fabric and

Inspect inside

cord damaged. Remove foreign material

of tire

Wheel (7)

Inspect

Replace if cracked. bent. or damaged

Change 4

2-326