Transmission Hoses, Lines and Fittings (cont).

TM 10-3930-638-24&P

2-38. TRANSMISSION MAINTENANCE (cont)

f. Transmission Hoses, Lines and Fittings (cont).

ITEM

ACTION

REMARKS

LOCATION

STEP

REMOVAL

Engine com-

a. Nut (1)

Loosen

partment

b. Transmission to cooler

Disconnect

and

hose (2)

cap

Plug transmission hole

c. Straight connector (3)

Remove

d. Nut (4)

Loosen

e. Cooler to transmission

Disconnect

and

hose (5)

cap

Plug transmission hole

f. Straight connector (6)

Remove

g. Nut (7)

Loosen

Plug transmission to cooler tube

h. Transmission to cooler

Disconnect

and

hose (2)

assembly (8)

remove

i. Nut (9)

Loosen

Plug cooler to transmission tube

Disconnect

and

j. Cooler to transmission

hose (5)

assembly (10)

remove

k. Cap screw (11), lock

Remove

washer (12), and

nut (13)

l. Hose clamp (14)

Remove

Transmission

a. Nut (15)

Loosen

Plug cooler hole

cooler, bottom

b. Transmission to cooler

Disconnect and

tube assembly (8)

remove

C. Elbow (16)

Remove

d. Pipe nipple (17)

Remove

e. Nut (18)

Loosen

Plug cooler hole

f. Cooler to transmission

Disconnect and

tube assembly (10)

remove

g. Elbow (19)

Remove

h. Pipe nipple (20)

Remove

CLEANING

Use clean diesel fuel and dry thoroughly

Hoses (2 and 5)

Clean

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes-with water immed-

iately, and obtain medical aid immediately.

2-230