Dipstick Tube Assembly (cont). - TM-10-3930-638-24-P0262

TM 10-3930-638-24&P

2-38. TRANSMISSION MAINTENANCE (cont)

d. Dipstick Tube Assembly (cont).

REMARKS

ACTION

ITEM

LOCATION

STEP

REMOVAL

Loosen

a. Two hose clamps(1)

Operator's com-

partment, rear

b. Dipstick hose (2)

Remove

a. Nut (3), lock washer

Remove

Transmission

(4), washer (5),

and cap screw (6)

b. Clamp (7)

Remove

c. Nut (8)

Loosen

Remove

d. Dipstick tube assembly

(9)

NOTE

Don't remove straight connector (10) or elbow (11) unless

replacement is necessary.

e. Straight connector (10) Remove

f. Elbow (11)

Remove

CLEANING

Dipstick hose (2)

Clean

Use clean diesel fuel

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immed-

iately, and obtain medical aid immediately.

Use cleaning solvent P-D-680

All other parts

Clean

INSPECTION

Hose clamps (1)

Inspect

Replace if damaged

Dipstick hose (2)

Inspect

Replace if cracked, cut, or torn

Straight connector (10)

Inspect

Replace if cracked, distorted, or threads

damaged

and elbow (11)

2-226