Transmission Linkage Controls (cont). - TM-10-3930-638-24-P0256

TM 10-3930-638-24&P

2-38. TRANSMISSION MAINTENANCE (Cont)

b. Transmission Linkage Controls (cont).

REMARKS

ACTION

ITEM

STEP

LOCATION

ADJUSTMENT (cont)

a. Move into for-

a. Direction control

Instrument panel

lever (24)

ward (F)

position

b. Measure clear-

ance between

lever and front

end of slot.

Clearance must

be 0.5-0.7

inch. Adjust if

necessary.

c. Adjust as follows:

(1) Remove cotter pin (17) and clevis pin (18)

(2) Disconnect clevis (19)

(3) Loosen nut (25)

(4) Adjust clevis (19) by threading onto or out of

cable (54)

(5) Tighten nut (25)

(6) Connect clevis ( 19) to lever (24) tab

(7) Install clevis pin (18) and cotter pin (17)

(8) Measure clearance (step b above)

d. Move into reverse (R) position.

e. Measure clearance between lever and back end of slot.

Clearance must be 0.5-0.7 inch. Adjust as necessary

(step c above)

b. Speed control lever (15) a. Move into second (2) speed position.

b. Measure clearance between lever and top of slot as indicated.

Clearance must be 0.9-1.1 inch. Adjust as necessary

2-220