Rear Wiring Harness. - TM-10-3930-638-24-P0227

TM 10-3930-638-24&P

2-34. WIRING HARNESS MAINTENANCE (cont)

b. Rear Wiring Harness.

c. Repair

a. Cleaning

This task covers:

d. Testing

b. Inspection

INITIAL SETUP

EQUIPMENT CONDITION

TOOLS

Condition Description

NSN 4910-00754-0654

Paragraph

No. 1 Common Organiza-

Engine off.

tional Maintenance Tool Kit

Battery ground cable disconnected.

2-33b

MATERIALS/PARTS

Cleaning solvent P-D-680

Clean cloths

REMARKS

ACTION

ITEM

LOCATION

STEP

CLEANING

Wipe with a clean, dry cloth

Wiring harness and wire

Clean

insulation

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or

excessive heat and don't smoke when using it. Failure to do so

could cause serious injury. If you become dizzy while using

cleaning solvent, get fresh air immediately, and get medical

attention. If contact with skin or clothes is made, flush with large

amounts of water. If contact with eyes is made, wash eyes with

water immediately, and obtain medical aid immediately.

Electrical terminals and

Use cleaning solvent P-D-680 on

Clean

connectors

terminals and connectors only

INSPECTION

Wiring harness and wires

Inspect

Repair if insulation frayed, or if

conductor broken

CHANGE 2 2-191