 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-638-24&P
2-30. LIGHT SYSTEMS MAINTENANCE (cont)
c. Rear Blackout Lights (cont).
REMARKS
ACTION
ITEM
STEP
LOCATION
CLEANING (cont)
WARNING
Wear safety glasses when drying parts with compressed air.
Failure to do so could cause serious injury to eyes and possible
blindness. If you hurt your eyes or if a foreign object is blown into
your eyes, seek medical attention immediately.
2
Body (13) and all
Use cleaning solvent P-D-680.
Clean
hardware
Dry thoroughly with compressed air
Wire connectors
3
Use cleaning solvent P-D-680 on
Clean
connectors only
4
Door (2), gasket (3) and
Wipe with a clean, dry cloth
Clean
socket assembly (12)
INSPECTION
All hardware
Replace if worn, or if threads damaged
Inspect
5
All wiring
6
Inspect
Replace if insulation frayed, or if
conductors broken
7
Body (13)
Inspect
Replace if cracked, damaged, or if
threads damaged
8
Door (2) and socket
Replace if cracked or damaged
Inspect
assembly (12)
Replace if cracked or deteriorated
9
Gasket (3) and
Inspect
grommet (14)
INSTALLATION/REPLACEMENT
Rear of vehicle
a. Grommet (14)
Install
10
In door (2)
b. Six screws (1)
Position
c. Six rings (5)
On screws (1)
Install
d. Socket assembly (12)
Position
In body (13)
e. Five screws (9 and 11)
Install and
Until socket assembly (12) is securely
mounted
and two washers (10)
tighten
f. Body (13)
Position
g. Two lock washers (8)
Until body (13) is securely mounted
Install and
and cap screws (7)
tighten
2-152
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals