Front Blackout Light (cont). - TM-10-3930-638-24-P0184

TM 10-3930-638-24&P

2-30. LIGHT SYSTEMS MAINTENANCE (cont)

b. Front Blackout Light (cont).

REMARKS

ITEM

ACTION

STEP

LOCATION

REMOVAL

Loosen

ROPS, top left

a. Three screws (1)

From body (9)

side

b. Door (3)

Remove

C. Bulb (5)

Depress, turn

counterclock-

wise and remove

Remove

d. Three springs (4) and

lamp unit (11)

From connector (15)

e. Harness lead (6)

Grasp and pull

f. Nut and lock washer (8)

Remove

g. Body (9)

From ROPS

Lift and remove

From body (9)

h. Connector (15) and

Remove

grommet (16)

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or

excessive heat and don't smoke when using it. Failure to do so

could cause serious injury. If you become dizzy while using

cleaning solvent, get fresh air immediately, and get medical

attention. If contact with skin or clothes is made, flush with large

amounts of water. If contact with eyes is made, wash eyes with

water immediately, and obtain medical aid immediately.

Wire connectors

Clean

Use cleaning solvent P-D-680 on

connectors only

WARNING

Wear safety glasses when drying parts with compressed air.

Failure to do so could cause serious injury to eyes and possible

blindness. If you hurt your eyes or if a foreign object is blown

into your eyes, seek medical attention immediately.

Door (3), lamp unit

Clean

Use cleaning solvent P-D-680.

Dry thoroughly with compressed air

(11), body (9) and

hardware

Wipe with a clean, dry cloth

Clean

Shell (14) and

grommet (16)

2-148