Starter (cont). - TM-10-3930-638-24-P0158

TM 10-3930-638-24&P

2-27. STARTING SYSTEM MAINTENANCE (cont)

a. Starter (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

TESTING (cont)

d. RPM indicator

Observe indica-

RPM indicator indicates 8000 to

(cont)

tion

13,000 RPM

NOTE

If ammeter does not indicate 52 to 90 amperes, or RPM indicator

does not indicate 8000 to 13,000 RPM, record voltage, current

and RPM, and forward test results with defective starter to

direct support maintenance. If ammeter indicates 52 to 90

amperes and RPM indicator indicates 8000 to 13,000 RPM,

proceed to step 8e.

e. Starter

a. Disconnect

from test set-

b. Disconnect

and tape

field coil lead

at solenoid

M terminal

c. Connect

solenoid ter-

minals to test

setup as

shown

f. Switch

g. Carbon pile

Adjust for 9 Vdc

indication on

voltmeter

h. Ammeter

Observe

Ammeter indicates 6.5 to 7.0 amperes

indication

NOTE

If ammeter does not indicate 6.5 to 7.0 amperes, record test

results and forward to direct support maintenance with defective

starter (solenoid switch defective).

2-122