REMOVAL - TM-10-3930-638-24-P0151

TM 10-3930-638-24&P

2-26. ALTERNATOR MAINTENANCE (cont)

ITEM

ACTION

REMARKS

STEP

LOCATION

REMOVAL

Engine compart-

a. Nut (1), lock washer(2) Remove

From BATT terminal

ment rear, left

and wire lead (3)

side of vehicle

From terminals 1, 2 and R

b. Push-on connector (4) Grasp and

disconnect

c. Cap screw (5), lock

Remove

washer (6) and

washer (7)

d. Nut (8), lock washer

Remove

Support alternator (11)

(9) and cap screw

(10)

e. Alternator (11)

Remove

Alternator

Nut (12), lock washer

Remove

Use pulley puller

(13), pulley (14)

and fan (15)

Engine compart-

a. Cap screw (16), lock

Remove

From engine

ment rear left

washer (17), strap

side of vehicle

(18) and spacer (19)

b. Cap screw (20), lock

Remove

From engine

washer (21) and

bracket (22)

c. Retainer halves (23)

Push together,

Remove resistor (24)

turn and

separate

d. Tie strap (25)

Cut and remove

From harness and diode (26)

e. Diode (26)

Unplug and

remove

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in

a well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or

excessive heat and don't smoke when using it. Failure to do so

could cause serious injury. If you become dizzy while using

cleaning solvent, get fresh air immediately, and get medical

attention. If contact with skin or clothes is made, flush with large

amounts of water. If contact with eyes is made, wash eyes with

water immediately, and obtain medical aid immediately.

2-115