SPARK ARRESTING MUFFLER AND EXHAUST PIPE MAINTENANCE (cont)

TM 10-3930-638-24&P

2-16. SPARK ARRESTING MUFFLER AND EXHAUST PIPE MAINTENANCE (cont)

ITEM

STEP

ACTION

LOCATION

REMARKS

REMOVAL (cont)

6 (cont)

c. Four cap

Remove

screws (8)

d. Bracket (9)

Remove

e. Support (10)

Remove

f. Two nuts (11),

Remove

lock washers

(12), and cap

screws (13)

Remove

g. Bracket ( 14)

Engine com-

a. Two nuts (15)

Remove

partment

and lock

washers (16)

b. Two cap screws

Remove

(17)

c. Two nuts (18),

Remove

lock washers

(19) and

washers (20)

d. Two cap screws

Remove

(21) and

washers (22)

e. Muffler (23)

Remove

f. Gasket (24)

Remove and discard

g. Two cap screws

Remove

(25) and lock

washers (26)

h. Bracket (27)

Remove

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immed-

iately, and obtain medical aid immediately.

WARNING

Wear safety glasses when drying parts with compressed air. Failure

to do so could cause serious injury to eyes and possible blindness.

If you hurt your eyes or if a foreign object is blown into your eyes,

seek medical attention immediately.

2-74