Fuel Strainer (cont)

TM 10-3930-638-24&P

2-15. FUEL SYSTEM MAINTENANCE (cont)

g. Fuel Strainer (cont).

REMARKS

ACTION

ITEM

LOCATION

STEP

REMOVAL/SERVICING

a. Hose clamp (1)

Engine compart-

Remove

b. Fuel filter

Disconnect

From hose barb (3)

ment, left side

hose (2)

and cap

c. Hose barb (3)

Remove

d. Fuel shut-off

Remove

valve (4)

e. Elbow (5)

Remove

f. Fuel strainer

From fuel tank

Remove

(6)

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water, If contact with eyes is made, wash eyes with water immedi-

ately, and obtain medical aid immediately.

WARNING

Wear safety glasses when drying parts with compressed air. Failure

to do so could cause serious injury to eyes and possible blindness.

If you hurt your eyes or if a foreign object is blown into your eyes,

seek medical attention immediately.

Fuel shut -off valve

Clean

Use cleaning solvent P-D-680. Immerse

(4) and fuel

and move slowly up and down until

strainer (6)

all foreign material is dissolved. Dry

thoroughly with compressed air

Use cleaning solvent P-D-680. Dry thor-

All other parts

Clean

oughly

2-60