Exhaust Manifold (cont). - TM-10-3930-638-24-P0074

TM 10-3930-638-24&P

2-14. ENGINE MAINTENANCE (cont)

e. Exhaust Manifold (cont).

ITEM

LOCATION

STEP

ACTION

REMARKS

CLEANING (cont)

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immed-

iately, and obtain medical aid immediately.

WARNING

Wear safety glasses when drying parts with compressed air. Failure

to do so could cause serious injury to eyes and possible blindness.

If you hurt your eyes or if a foreign object is blown into your eyes,

seek medical attention immediately.

All parts

Clean

Use cleaning solvent P-D-680. Dry thorough-

ly with compressed air

Cylinder head

Clean

Mating surface and studs with cleaning sol-

vent P-D-680. Ensure that all traces of

gasket material removed.

INSPECTION

Exhaust mani-

lnspect

Replace if cracked, or damaged or if threads

fold (4)

damaged

Inspect

All other parts

Replace if cracked, damaged or worn or if

threads damaged

REASSEMBLY

Install

Exhaust mani-

a. Two gaskets (12)

fold

b. Two outlet cover

Install

plates (11)

Position

c. Two nuts (10)

Position

d. Four washers

On four cap screws (8,6)

(9, 7)

e. Four cap screws

Install

(8, 6)

2-38