Intake Manifold

TM 10-3930-638-24&P

2-14. ENGINE MAINTENANCE (cont)

d. Intake Manifold (cont)

REMARK

ACTION

ITEM

LOCATION

STEP

REMOVAL

From elbow (2)

Disconnect

a Tube (1)

Engine, left side

Remove

b. Elbow (2)

Remove

c. Filter fitting

(3)

Loosen

d. Hose clamp (4)

WARNING

If NBC exposure is suspected, all air filter media should be handled by

personnel wearing protective equipment. Consult your unit NBC Officer

or NBC NCO for appropriate handling or disposal procedures.

Remove hose clamp (4)

Disconnect and

e. Air cleaner hose

remove

(5)

From spray nozzle (7)

Disconnect and

f. Delivery tube

remove

(6)

Disconnect and

g. Spray nozzle (7)

remove

Remove

h. Washer (8)

Remove

i. Adapter (9)

Remove

j. Gasket (10)

Support intake manifold

Remove

k. Five nuts (11)

(14)

Remove

1. Three washers (12)

Remove

m. Two washers (13)

Remove

a Intake manifold

Cylinder

(14)

Remove and

b. Gasket (15)

Discard

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable.

Wear protective goggles and gloves and use only in a well ventilated area.

Avoid contact with skin, eyes and clothes and don't breathe vapors. Do not

use near open flame or excessive heat and don't smoke when using it. Failure

to do so could cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If contact with

akin or clothes is made, flush with large amounts of water. If contact with

eyes is made, wash eyes with water immediately, and obtain medical aid im-

mediately.

WARNING

Wear safety glasses when drying parts with compressed air. Failure to do

so could cause serious injury to eyes and possible blindness. If you hurt

your eyes or if a foreign object is blown into your eyes, seek medical atten-

tion immediately.

Use cleaning solvent P-D-680

clean

All parts

Dry thoroughly with com

pressed air

Change 5 2-33