Special Information. - TM-10-3930-634-34P0011

TM 10-3930-634-34P

e. Part Number (Column (5)). Indicates the primary number used by the manufacturer (individual,

company, firm, corporation, or Government activity), which controls the design and characteristics of the

item by means of its engineering drawings, specifications standards, and inspection requirements to

identify an item or range of items.

NOTE: When you use an NSN to requisition an item, the item you receive may have a different part

number from the part ordered, but go ahead and use or furnish it as the replacement part.

f. Description (Column (6)). This column includes the following information:

(1) The Federal item name and, when required, a minimum description to identify the item.

(2) Items that are included in kits and sets are listed below the name of the kit or set.

(3) Spare/repair parts that make up an assembled item are listed immediately following the

assembled item line entry.

(4) NSN's for bulk materials are referenced in the description column in the line item entry for

the item to be manufactured/fabricated.

(5) When the part to be used differs between serial numbers of the same model, the effective

serial numbers are shown as the Iast line of the description.

g. U/M (Column (7)). The Unit of Measure (U/M) indicates the measure (e.g., foot, gallon, pound) or

count (e. g., each, dozen, gross) of a listed item. A two-character alpha code (e.g., FT, GL, LB, EA, DZ,

GR) appears in this column to indicate the measure or count. If the U/M code appearing in this column

differs from the Unit of Issue (U/I) code listed in the Army Master Data File (AMDF), request the lowest

U/I that will satisfy your needs.

h. QTY INC IN UNIT (Column (8)). The Quantity Incorporated in Unit (QTY INC IN UNIT) indicates

the quantity of the item used in the breakout shown on the illustration figure, which is prepared for a

functional group, subfunctional group, or an assembly. A "V" appearing in this column in lieu of a quantity

indicates that no specific quantity is applicable (e.g., shims, spacers).

4. Special Information.

a. Bulk materials required to manufacture items are listed in the Bulk Material Group of this

manual. NSN's for bulk materials are also referenced in the description column of the line item entry for

the item to be manufactured/fabricated.

b. Line item entries for repair parts kits and sets appear as the last entries in the repair parts

listing for the figure in which their parts are listed as repair parts.

c. Items which have the word BULK in the figure number column will have an index number shown

in the item number column. This index number is furnished for use as a cross-reference between the

National Stock Number/Part Number Index and the bulk material list in Section II.

1-5