Figure 3-45.cleaning injector spray tip orifices

Page Title: Figure 3-45.cleaning injector spray tip orifices
Back | Up | Next

Web
www.tpub.com

Home

Information Categories

....

TM 10-3930-634-34

f. Reassembly. Refer to figure 3-59 and reassemble

the governor assembly.

NOTE

Low speed weights are identified by their

short cam arms and three center laminations,

each approximately 9/64 inch (0. 140 inch) thick

on weight carrier. High speed weights are

identified by long cam arm and three center

laminations; middle lamination is 3/16, inch

thick and the outer laminations are 1/8 inch

thick.

3-40

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business