Hydraulic Reservoir - TM-10-3930-631-340102

TM 10-3930-631-34

pound, solvent (Fed.

Spec.

P-D-680) and dry

KEY to fig. 7-23:

21. Lock washer

thoroughly.

1. Hose assembly

22. Nut

(2) Inspect all hoses for evidence of leakage,

2. Hose assembly

23. Clamp

deterioration and damage.

Replace unserviceable

3. Elbow

24. Hose assembly

hoses.

4. Elbow

25. Hose

(3) Inspect all fittings for leakage and damage to

5. Clamp

26. Hose assembly

threads. Many fittings include packings. Replace all

6. Hose

27. Hose fitting

damaged fittings and all packings.

7. Hose fitting

28. Elbow

c. Installation. Refer to figure 7-23 and install

8. Clamp

29. Elbow

9. Hose

30. Nipple

hoses and tubes.

10. Hose fitting

31. Screw

7-18. Hydraulic Reservoir

11. Drilled fitting

32. Lock washer

a. Removal.

12. Hose assembly

33. Nut

(1) Refer to TM10-3930-631-12 and drain

13. Union

34. Indicator

hydraulic reservoir.

14. Elbow

35. Screw

(2) Remove toe and floor plates and drip pan.

15. Tube assembly

36. Lock washer

(3) Disconnect wires from thermal relays (7, fig.

16. Tube assembly

37. Bracket

7-24).

17. Nut

38. Elbow

18. Lock washer

39. Elbow

19. Tube assembly

40. Tie

20. Screw

41. Elbow

b. Cleaning, Inspection and Repair.

(1) Clean all metal parts in cleaning corn-

7-35