Side Shift Carriage - TM-10-3930-631-340092

TM 10-3930-631-34

(2) Remove lock ring (2) and spacer (4).

(2) If bearings (9 and 18, fig. 7-14) were

Compress lock ring (5) and remove lock ring and head

removed, press new bearings in head and tube.

and rod from tube.

(3) Install seal (15) in groove on rod (16). Install

(3) Remove rod, with remaining parts at-

backup washers (12) and packing (13) in groove on

tached, from tube.

outside of piston. Install piston (14) on rod and secure

(4) Slide head (8) from rod. Remove wiper (3),

with nut (11).

backup washer (6) and packing (7) from head. Remove

(4) Slide rod assembly into tube (17), piston

seal (10) from head.

first.

(5) Remove nut (10) and slide piston from rod.

(5) Install packing (7) and backup washer (6) in

Remove backup washers (12) and packing (13) from

head. Install seal (10) in groove in outside of head.

piston. Remove seal (15) from rod (16).

Place lock ring (5), spacer (4) and lock ring (2) in position

c. Cleaning, Inspection and Repair.

on head. Install wiper (3) in groove in inside of head.

(6) Slide head into tube around rod, with lock

(1) Clean all metal parts in cleaning com-

ring compressed, until lock ring (5) snaps into place in

pound, solvent (Fed.

Spec.

P-D-680) and dry

tube.

thoroughly.

(7) Install lubrication fitting (1) in cylinder.

(2) Inspect tube bore, head and piston for

e. Installation. Refer to TM10-3930-631-12 and

cracks, scratches, scoring and other damage. Replace

install side shift cylinder in carriage.

worn or damaged parts.

(3) Inspect bearings in head and tube.

7-10. Side Shift Carriage

bearings are worn or damaged press bearings from

a. Removal. Refer to paragraph 2-14 and remove

head.

side shift carriage from mast.

(4) Replace all packings, backup washers and

b. Disassembly.

seals contained in repair kit for cylinder.

(1) Remove screws (4 and 6, fig. 7-15), lock

d. Assembly.

washers (5) and spacers (7) from carriage frame.

(1) Coat all cylinder parts with engine oil (OE)

before assembly.

7-23