Side Shift Carriage

TM 10-3930-631-34

(2) Attach a hoist to backrest, remove screws

Plug or cap hoses and cylinder fittings to prevent

and lock washers and remove backrest from carriage.

entrance of foreign matter.

(3) Raise the inner mast 24 inches from the

(5) Remove spacer and screws from rear of

floor and block in position.

carriage supports.

(6) Attach a hoist to the carriage frame. Lift

CAUTION

frame to remove slack from chains and balance the load.

Before proceeding with carriage removal

(7) Disconnect chains (fig. 2-5) from carriage

disconnect battery receptacle and discharge

frame.

capacitors.

(8) Slowly lower carriage frame and side shifter

(4) Disconnect hydraulic hoses (fig. 2-5) from

out of the bottom of the inner mast. Place frame on

side shift cylinder and swivel block on carriage.

suitable supports.

2-10