Section XIV. STEERING

TM 10-3930-627-12

b. Repair. Patch tube or replace as required.

washers (11) holding rim disks (3 and 7) together, and

c. Installation. Reverse procedure in a above.

remove disks (3 and 7) from tires.

(4) Remove tire flap (4) and inner tube (5)

Inflate tires to 100 psi.

from tire (6).

Section XIV. STEERING

4-47. Drag Link

4-48. Tie Rods

a. Removal

a. Removal.

(1) Remove drag link end (1, fig. 4-25) from

(1) Block up vehicle to a suitable working

steering axle end.

height.

(2) Remove drag link end 14) from steering

(2) Remove cotter pins and castellated

arm (5).

nuts from tie rod end at ends of tie rods (6. fig. 4-25).

b. Installation. With rear wheels pointed straight

(3) Remove the tie rod assembles from the

truck.

ahead, and steering wheel in center (straight ahead)

b. Installation. Reverse procedure in a above.

position, reverse procedure in a above.

c. Adjustment. With clamps (2) loose, twist drag

c. Adjustment. Loosen tie rod end clamps.

link as necessary to adjust steering wheel center spoke

Twist each tie rod until distance between rear tires at hub

vertically downward with rear wheels still in straight

height is 323/4 inches front and rear.

ahead position.

4-31