Recoverability Code - TM-10-3930-624-24P0012

TM 10-3930-624-24P

H-

General support is the lowest level that can

d. PART NUMBER (Column (4)). Indicates the

do complete repair of the item.

primary number used by the manufacturer (individual,

L-

Specialized repair activity is the lowest level

company, firm, corporation, or Government activity),

that can do complete repair of the item.

which controls the design and characteristics of the item

D-

Depot is the lowest level that can do com-

by means of its engineering drawings, specifications

plete repair of the item.

standards, and inspection requirements to identify an

Z-

Nonreparable. No repair is authorized.

item or range of items.

B-

No repair is authorized. (No parts or special

NOTE : When you use an NSN to requisition an item,

tools are authorized for the maintenance of a

the item you receive may have a different part number

"B"-coded item.) However, the item may be

from the part ordered.

reconditioned by adjusting, lubricating, etc.,

e. DESCRIPTION AND USABLE ON CODE (UOC)

at the user level.

(Column (5)).

This column includes the following

(3) Recoverability Code. Recoverability codes

information:

are assigned to items to indicate the disposition action

(1) The Federal item name and, when

on unserviceable items. The recoverability code is

required, a minimum description to identify the item.

entered in the fifth position of the SMR code as follows:

(2) Physical security classification.

Not

Applicable.

Code

Application/Explanation

(3) Items that are included in kits and sets are

Z-

Nonreparable item. When unserviceable,

listed below the name of the kit or set on Figure KIT.

condemn and dispose of the item at the level

(4) Spare/repair parts that make up an

of maintenance shown in the 3d position of

assembled item are listed immediately following the

the SMR code.

assembled item line entry.

O-

Reparable item. When uneconomically

(5) Part numbers for bulk materials are

reparable, condemn and dispose of the item

referenced in this column in the line item entry for the

at unit maintenance or aviation unit level.

item to be manufactured/fabricated.

F-

Reparable item. When uneconomically

(6) When the item is not used with all serial

reparable, condemn and dispose of the item

numbers of the same model, the effective serial numbers

at the direct support or aviation intermediate

are shown on the last line(s) of the description (before

level.

UOC). Not Applicable.

H-

Reparable item. When uneconomically

(7) The usable on code, when applicable (see

reparable, condemn and dispose of the item

paragraph 5, Special Information).

at the general support level.

(8) In the Special Tools List section, the basis

D-

Reparable item. When beyond lower level

of issue (BOI) appears as the last line(s) in the entry for

repair capability, return to depot. Condem-

each special tool, special TMDE, and other special

nation and disposal of item not authorized

support equipment.

When density of equipments

below depot level.

supported exceeds density spread indicated in the basis

L-

Reparable item. Condemnation and dis-

of issue, the total authorization is increased

posal of item not authorized below

proportionately.

specialized repair activity (SRA).

(9) The statement "END OF FIGURE"

A-

Item requires special handling or condem-

appears just below the last item description in Column 5

nation procedures because of specific

for a given figure in both Section II and Section III.

reasons (e.g., precious metal content, high

f. Q7Y (Column (6)). The QTY (quantity per figure

dollar value, critical material, or hazardous

column) indicates the quantity of the item used in the

material). Refer to appropriate manuals/di-

breakout shown on the illustration/figure, which is

rectives for specific instructions.

prepared for a functional group, subfunctional group, or

c. CAGEC (Column (3)). The Commercial and

an assembly. A "V" appearing in this column in lieu of a

Government Entity (CAGE) Code (C) is a 5-digit

quantity indicates that the quantity is variable and the

alphanumeric code which is used to identify the

quantity may vary from application to application.

manufacturer, distributor, or Government agency, etc.,

4. Explanation of Columns (Section IV).

that supplies the item.

a. NATIONAL STOCK NUMBER (NSN) INDEX.

(1) STOCK NUMBER column. This column

lists the NSN by National Item Identification Number

(NIIN)