HYDRAULIC TANK ASSEMBLY.

TM 10-3930-623-34

Hang tank on studs and install flat washers, lock

6-115. HYDRAULIC TANK ASSEMBLY.

washers and nuts. Connect hydraulic pump pick-up and

1. Apply gasket sealer to both sides of the pick-up

control valve return hoes.

Connect power steering

tube (49, figure 4-2) flange. Assemble tube to hydraulic

return hose.

reservoir tank (50).

6-117. EXHAUST SYSTEM.

2. Assemble screen filter element (48) to outlet

elbow flange (44).

6-118. REPAIRS . Repairs are not to be made to any

portion of the exhaust system. Defective items must be

3. Assemble fl ange elbow and gasket (47) to tank

replaced.

with screws (45) and washers (46).

Torque screws to 15-18 foot-pounds maximum.

6-119. INSTALLATION.

1. Assemble exhaust pipe (3, figure 4-29) to the

NOTE

muffler (1) with clamp (2).

Excessive tightening will cause

2. Install muffler and pipe into chassis with screws

flange to ripple permitting leakage.

(4), lock washers (5) and flat washers (6).

4. Assemble plugs (42 and 43) to tank.

3. Install exhaust elbow (9) on exhaust manifold

5. Assemble combinat ion

breather

and

filler

with gaskets (12).

assembly (40) to tank.

4. Install exhaust hose (7) between the elbow and

6-116. HYDRAULIC TANK INSTALLATION. Install

the pipe with clamp (8).

hydraulic tank (50, figure 4-2) from underside of truck.

5. Install counterweight, overhead guard, seat and

sheet metal. See TM 10-3930-623-12.

6-29/30