DRIVE AXLE - TM-10-3930-623-340027

TM 10-3930-623-34

Type .........................single-speed with forward and

2-8. POWER STEERING

reverse constant mesh, power-shifted by

Make............................................................... Saginaw

selective engagement of clutches in oil

Type ..........................................................rotary valve

Ratio ......................................... 1.19 to 1 reduction

Power Source ............................... main hydraulic pump

Input ..................................... from torque converter

priority valve

Output ..........................direct to drive axle ring gear

2-9. HYDRAULIC SYSTEM

Clutches ................................ 2 self-adjusting single

cork-faced disks

Fluid Capacity of Reservoir ............................ 12-1/2 gal.

Fluid............................................................. OE 10

Fluid................................................................... OE 10

Capacity......................................................... 16 qt

System Relief Valve Setting ............................. 1800 psi

(Includes Drive Axle and Torque Converters)

Pump

Make ................................... Tyrone PVP2-150AND

2-6. DRIVE AXLE

Drive .................................. from engine timing gear

Type .............................................................. gear

Make.......................................... Rockwell-Standard

Tilt Cylinders

Reduction Gearing .......... double-reduction, ring and

Make ............................................................ Baker

pinion plus internal-to-sun gears

Type ................................................. double-acting

Reduction Overall ................................... 17.27 to 1

Hoist Cylinder

Make ............................................................ Baker

Number of Wheels ................................................ 6

Type ....................... single-acting 2-stage, pressure

Tire Size .................................................. 7.00 x 12

hoist, gravity return

Pressure ..................................................... 100 psi

2-10. ELECTRIC SYSTEM

Brake (Service) ............ hydraulic drum type, internal

Voltage ........................................................12 volts dc

expanding shoes, self-adjusting

Engine Ignition System............. Delco-Remy battery-coil-

Brake (Parking) ............... uses service brakes, lever

distributor type; radio

operated through linkage

interference suppressed

to wheels

Alternator

Brake Drum Size ............................ 11.5 in. x 2.5 in.

Wheels ............................. individually demountable

Make and Model ....................Delco-Remy 1100858

disk type

Ground Polarity ......................................... negative

2-7. STEERING AXLE

Test Specifications

Field Current at 80 Deg F ..................2.2 to 2.6 amp

and 12 Volts

Manufacturer ................................................ Baker

Cold Output at 14 Volts ............ 21 amp at 2000 rpm

King Pin Geometry ........................................neutral

30 amp at 5000 rpm

Tire Size ............................................ 6.90/6.00 x 9

Pressure ..................................................... 100 psi

2-6