SPECIAL information. - TM-10-3930-623-20P0010

TM 10-3930-623-20P

company, firm, corporation, or Government activity),

g. U/M (Column (7)). The Unit of Measure (U/M)

which controls the design and characteristic of the item

indicates the measure (e.g., foot, gallon, pound) or count

by means of its engineering drawings, specifications

(e.g., each, dozen, gross) of a listed item. A two-

standards, and inspection requirements to identify an

character alpha code (e.g., FT, GL, LB, EA, DZ, GR)

item or range of items.

appears in this column to indicate the measure or count.

If the U/M code appearing in this column differs from the

Unit of Issue (U/I) code listed in the Army Master Data

NOTE

File (AMDF), request the lowest U/I that will satisfy your

needs.

When you use an NSN to requisition

an item, the item you receive may

h. QTY INC in UNIT (Column (8)). The Quantity

have a different part number from the

Incorporated in Unit (QTY INC in UNIT) indicates the

part ordered, but go ahead and use

quantity of the item used in the breakout shown on the

or furnish it as the replacement part.

Illustration figure, which is prepared for a functional

f. DESCRIPTION (Column (6)).

This column

group, subfunctional group, or an assembly. A "V"

includes the following information:

appearing in this column in lieu of a quantity indicates

that no specific quantity is applicable (e.g., shims,

(1) The Federal item name and, when required, a

spacers).

minimum description to identify the item.

4. SPECIAL information.

(2) The

physical

security

classification.

Not

applicable.

a. Bulk materials required to manufacture items are

listed in the Bulk Material Group of this manual. NSN's

(3) Items that are included in kits and sets are listed

for bulk materials are also referenced in the description

below the name of the kit or set.

column of the line item entry for the item to be

manufactured/fabricated.

Detailed manufacturing

(4) Spare/repair parts that make up an assembled

instructions for Items source coded to be manufactured

Item are listed immediately following the assembled Item

or fabricated are found in TM 10-3930-623-12.

line entry. If the first item of a figure is indented, the

assembly appears as the last item in the previous figure.

b. Detailed assembly instructions for items source

coded to be assembled from component spare/repair

(5) NSN's for bulk materials are referenced in the

parts are found in TM 10-3930-623-12. Items that make

description column in the line Item entry for the Item to

up the assembly are listed immediately following the

be manufactured/fabricated.

assembled item entry.

(6) When the part to be used differs between serial

c. Line item entries for repair parts kits and sets

numbers of the same model, the effective serial numbers

appear as the last entries in the repair parts listing for

are shown as the last line of the description.

the figure in which their parts are listed as repair parts.

(7) The USABLE ON CODE. Not applicable.

d. Items which have the word BULK in the figure

number column will have an index number shown in the

(8) in the Special Tools List section, the Basis Of

item number column. This index number is furnished for

Issue (BOI) appears as the last line(s) in the entry for

use as a cross-reference between the National Stock

each special tool, special TMDE, and other special

Number/Part Number Index and the Bulk Material List in

support equipment.

When density of equipments

Section II.

supported exceeds density spread indicated in the basis

of issue, the total authorization is increased

proportionately.