 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-623-12
Type ................................single-speed with forward and
Type ...........................................................rotary valve
reverse constant mesh, power-shifted by
Power Source................................ main hydraulic pump
selective engagement of clutches in oil
priority valve
Ratio ............................................... 1.19 to 1 reduction
9.
HYDRAULIC SYSTEM
Input ............................................ from torque converter
Fluid Capacity of Reservoir ........................... 12-1/2 gal.
Output ................................direct to drive axle ring gear
Clutches ...................................... 2 self-adjusting single
cork-faced disks
Fluid................................................................... OE 10
System Relief Valve Setting ............................ .1800 psi
Pump
Fluid (Group C Trucks) ....................................... OE 10
Make...................................... Tyrone PVP2-150 AND
Capacity............................................................... 16 qt
Drive ..................................... from engine timing gear
(Includes Drive Axle and Torque Converters)
Type .................................................................. gear
6.
DRIVE AXLE
Tilt Cylinders
Make................................................ Rockwell-Standard
Make ............................................................... Baker
Reduction Gearing ................ double-reduction, ring and
Type .................................................... double-acting
pinion plus internal-to-sun gears
Hoist Cylinder
Reduction Overall ......................................... 17.27 to 1
Make................................................................ Baker
Type ........................... single-acting 2-stage, pressure
Number of Wheels ...................................................... 6
hoist, gravity return
Tire Size......................................................... 7.00 x 12
10. ELECTRIC SYSTEM
Pressure ........................................................ 100 psi
Voltage.........................................................12 volts dc
Brake (Service)................... hydraulic drum type, internal
Engine Ignition System............. Delco-Remy battery-coil-
expanding shoes, self-adjusting
distributor type; radio
interference suppressed
Brake (Parking) ..................... uses service brakes, lever
operated through linkage
to wheels
Brake Drum Size................................... 11.5 in. x 2.5 in.
Wheels ................................... individually demountable
Make and Model
disk type
....................................................Delco-Remy 1100858
7.
STEERING AXLE
Ground Polarity ............................................... negative
Manufacturer ...................................................... Baker
Test Specifications (All Trucks)
King Pin Geometry ..............................................neutral
Field Current at 80 Deg F ........................2.2 to 2.6 amp
Tire Size................................................... 6.90/6.00 x 9
and 12 Volts
Pressure ........................................................ 100 psi
Cold Output at 14 Volts .................. 21 amp at 2000 rpm
8.
POWER STEERING
30 amp at 5000 rpm
Make .............................................................. Saginaw
Rated Hot Output .............................................. 32 amp
2-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals