Section II. MOVEMENT TO A NEW WORKSITE

Section II. MOVEMENT TO A NEW WORKSITE

2-3. Dismantling for Movement

refer to figure 2-1 and install the forks on the car-

riage.

The only component that may require dismantling

for movement is the forks. If necessary to conserve

space when transporting the lift truck by means of

another carrier, refer to figure 2-1 and remove the

forks.

2-5. Normal Movement

2-4. Reinstallation after Movement

The fork lift truck is fully mobile and can normally

be moved to a new worksite under its own power.

If forks were removed to transport the lift truck,

Section III. CONTROLS AND INSTRUMENTS

2-6. General

2-7. Controls and Instruments

Refer to figures 2-2 and 2-3 for the purpose, normal

This section describes, locates, illustrates, and fur-

nishes the operator, crew, or organizational mainte-

readings, and location of all controls and instru-

nance personnel sufficient information to insure

ments.

proper operation of the fork lift truck.

2-3