Figure 3-82. Differential, partially disassembled.

KEY to fig. 3-80:

1. (4)

2. washer (2)

3. shield (2)

4. Screw (4)

5. washer (4)

6. Nut (2)

7. Washer (2)

8. Washer (2)

9. Tapered roller bearing (4)

10. Seal (2)

11. Axle retainer (2)

12. -Axle shaft (2)

13:. Seal (2)

14. Slotted nut (2)

15. Washer (2)

16. Wheel spindle (2)

17. Screw (2)

18. Screw (8)

19. lock washer (10)

20. Protective plug (4)

21. drive wheel brake backing plate (2)

22. Pin (4)

23:. Screw (8)

24. Screw (2)

25. Axle housing cover

Figure 3-81. Differential and carrier assembly, component

26. Gasket (2)

location.

27. Ring spacer

28. Axle housing breather

29. Pipe plug

30. Pipe plug

31. Screw (2)

32. Screw (4)

33. Screw (2)

34. nut (2)

35. lock washer (8)

36. Carrier washer (8)

37. Drive housing

(5) Remove screws securing caps to carrier

housing.

(6) Remove caps.

(7) Remove adjusting nuts, bearings, and

bearing cup.

Note. Alignment marks on case halves are to be used

whenever case is reassembled.

(8) Remove screws securing case halves

together.

Figure 3-82. Differential, partially disassembled.

(9) Remove plain case, gears, thrust washers,

and spider gear.

(10) Remove lockwire and special screws.

securing ring gear to flanged case.

Note. Ring gear is pinned in place.

(11) Drive out groove pins and separate gear

and case.

3-93