Chapter 1. INTRODUCTION - TM-10-3930-620-340010

CHAPTER 1

INTRODUCTION

Section I. GENERAL

general support, and by depot maintenance facilities for

1-1. Scope

support of the equipment is contained in TM 10-3930-

a. This manual contains instructions for the use of

620-35P.

Direct Support and General Support Maintenance

1-2. Forms and Records

personnel maintaining the Truck, Lift, Fork, Solid Rubber

a. The DA forms and records used for equipment

Tired Wheels, 6000 Pound Capacity, 180 Inch Lift, Allis

maintenance will be only these prescribed in TM 38-750.

Chalmers Model FE-60-EE, Army Model MHE-214,

b. Reporting

errors,

omissions,

and

Federal Stock Number 3930-479-8769 as allocated by

the Maintenance Allocation Chart.

It provides

recommendations for improving this publication by the

information on the maintenance of the equipment which

individual user is encouraged.

Reports should be

is beyond the scope of the tools, equipment, personnel,

submitted on DA Form 2028 (Recommended Changes

or supplies normally available to the using organization.

to Publications) and forwarded direct to Commanding

b. The appendix contains a list of references. TM

General, U. S. Army Mobility Equipment Command,

10-3930-620-12 contains the maintenance allocation

ATTN: AMSME-MPP, 4300 Goodfellow Boulevard, St.

chart. The list of repair parts required by direct and

Louis, Mo. 63120.

Section II. DESCRIPTION AND DATA

Free lift .......................................... 69 in.

1-3. Description

Maximum lift height ....................... 180 in.

A general description of the fork lift truck and information

Lowest fork position ...................... Floorline

pertaining to the identification plates are contained in TM

Lift speed, loaded......................... 33 fpm

10-3930-620-12. More detailed descriptions of specific

Lift speed, empty........................... 51 fpm

assemblies and components are contained in the

d. Fork data.

applicable section(s) and maintenance paragraphs of

Length ........................................... 40 in.

this manual.

Width ............................................. 5 in.

1-4. Tabulated Data

Center-to-center spacing be-

This paragraph contains all maintenance data pertinent

tween forks ............................... 6 in. to 32 in.

to direct support, general support, and depot

e. Wheel and tire data.

maintenance personnel.

Number of wheels ......................... 4

a. Distributor.

Number of drive wheels ................ 2

Manufacturer ................................. Allis Chalmers

Number of steerable wheels ......... 2

Model............................................. FE-60-EF

Tires .............................................. Solid rubber, cushion

U.S. Army Registration

type

Numbers ................................... 10669388 thru

f. Underclearance.

10669518

At axle ........................................... Drive 8 1/2 in.

b. Operating data.

Steer......................................... 5 1/2 in.

Capacity......................................... 6000 lbs

At mast .......................................... 3 1/2 in.

Load center.................................... 24 in.

At truck center ............................... 6 in.

Outside turning radius ................... 79 in.

g. Gradeability.

Speed range .................................. 1 mph min

Maximum grade, loaded .............. 15 pet

c. Lift data.

Maximum grade, empty ................ 15 pet

Lift type .......................................... 2 telescoping cylinders

h. Capacities.

Forward tilt..................................... 3 deg

Hydraulic oil reservoir.................... 7.56 gal.

Backward tilt .................................. 8 deg

Hydraulic oil system, useable........ 7.10 gal.

Brake system, complete................ 0.3 pint

1-1