| |
SECTION I
TM 10-3930-615-24P
(1)
Source Code. The source code tells you
how to get an item needed for maintenance, repair or
overhaul of an end item/equipment. Explanations of
source codes follows:
Code
Application/Explanation
PA
Stocked items; use the applicable NSN to
PB
request/requisition items with these
PC**
source codes. They are authorized to the
PD
category indicated by the code entered in
PE
3d position of the SMR code.
PF
PG
**Items coded PC are subject to deterioration.
KD
Items with these codes are not to be
KF
requested/requisitioned individually. They
KB
are part of a kit which is authorized to the
maintenance category indicated in the 3d
position of the SMR code. The complete kit
must be requisitioned and applied.
MO-(Made at UM
Items with these codes are not
A VUM Level)
to be requested/ requisitioned
MF-(Made at DS/
individually. They must be
made
A VUM Level)
from bulk material which is
identified by the part number in
the DESCRIPTION AND
USABLE ON CODE (UOC)
column and listed in the
Bulk Material group
ML-(Made at
of the repair parts list in this
Specialized Repair
RPSTL. If the item is
authorized
Act (SRA))
to you by the 3d position code
of the SMR code, but if the
MD-(Made at
source code indicates it is made
Depot)
at a higher level, order the item
from the higher level of
maintenance.
AO-(Assembled by
Items with these codes are not
UM/A VUM Level)
to be requested/requisitioned
individually The parts that
AF-(Assembled by
make up the assembled item
DS/A VIM Level)
must be requisitioned or fabrica
ted and assembled at the level
AH-(Assembled by
of maintenance indicated by
GS Category)
the source code. If the 3d posi-
tion code of the SMR code by
AL-(Assembled by
authorizes you to replace the
SRA)
item, but the source code indi-
AD-(Assembled
cates the item is assembled at a
by Depot)
bled at a higher level, order the
item from the higher level of
maintenance.
XA -
Do not requisition an "XA"-coded Item. Or-
der its next higher assembly. (Also, refer to
the NOTE below.)
XB -
If an "XB" item is not available from salvage
order it using the CAGE and part number
given
XC -
Installation drawing, diagram, instruction
sheet, field service drawing, that is identi-
fied by the manufacturer's part number.
XD -
Item is not stocked. Order an "XD"-
coded item through normal supply channel
using the CAGE and part number
given, if no NSN is available.
NOTE: Cannibalization or controlled exchange,
when authorized, may be used as source of supply
for items with the above source codes, except for
those source coded "XA" or those aircraft support
items restricted by requirements of AR 700-42.
(2)
Maintenance Code. Maintenance codes
tell you the level(s) of maintenance authorized to USE
and REPAIR support items. The maintenance codes
are entered in the third and fourth positions of the SMR
Code as follows:
(a)
The maintenance code entered in the
third position tells you the lowest maintenance level
authorized to remove, replace and use an item. The
maintenance code entered in the third position will
indicate authorization to one of the following levels of
maintenance:
Code
Application/Explanation
C -
Crew or operator maintenance done within unit
or aviation unit maintenance.
O -
Unit maintenance or aviation unit category can
remove, replace and use the item.
F -
Direct support or aviation intermediate level can
remove, replace and use the item.
H -
General support level can remove, replace and
use the item.
L -
Specialized repair activity can remove, replace
and use the item.
2
|