 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 BRAKES
2. Slide shoes into the guides and install springs in
the shoe holes nearest the backing plate.
3. Turn cam in the direction to bring shoes as
close together as possible. Slide drum over the shoes
onto the pilot of the flange. Install the attaching screw.
Operate cam lever several times, then revolve drum to
check for scraping or binding.
4. Connect linkage clevis and adjust cable on
standard models.
NOTE: Check cylinder piston-cylinder clearance
before connecting clevis on power-shift models.
Figure 18.
Figure 19.
C. CLEANING AND INSPECTION
Refer to Cleaning and Inspection procedure of the
service brake system.
D. ASSEMBLY
NOTE: Apply Lubriplate to all sliding surfaces.
1. Slip rollers on the pawl pins. If operating cam
was removed, install it making sure the lever lies in the
backing plate depression, then install flange.
B-143
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals