TM 10-3930-669-34 Section I.  REPAIR PARTS; SPECIAL TOOLS; TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE); AND SUPPORT EQUIPMENT 2-1.  COMMON TOOLS AND EQUIPMENT. For authorized common tools and equipment,  refer  to  the  Modified  Table  of  Organization  and  Equipment  (MTOE),  CTA 50-970  or  CTA  8-100,  as  applicable  to  your  unit.    Table  2-1  lists  tool  kits  required  and  authorized   for   use   at   the Direct/General Support Maintenance level.  Reference code numbers listed in the first column correspond to those listed in the same column on the Maintenance Allocation Chart (MAC). Table 2-1.  Authorized Direct/General Support Tool Kits Tool Or Test Equipment Maintenance Tool Kit Ref Code Level Nomenclature Stock Number 1 O,F,H Tool kit, general mechanic’s: automotive 5180-00-177-7033 2 O,F,H Shop equipment, automotive maintenance and 4910-00-754-0654 repair: organizational maintenance common no. 1, less power 9 O,F,H Shop equipment, automotive maintenance and 4910-00-754-0653 repair: organizational maintenance supplemental no. 1, less power 5 O,F,H Shop equipment, automotive maintenance and 4910-00-754-0705 repair: field maintenance, basic 7 O,F,H Shop equipment, fuel and electrical system, 4910-00-754-0714 engine: field maintenance, basic 10 O,F,H Shop welding set 3433-00-357-6311 8 F,H Shop equipment, machine shop 3470-00-754-0708 2-2.  SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT. The  Maintenance  Allocation  Chart  (MAC)  identifies  the  authority  and  responsibility  for  maintenance  tasks  listed  in  this manual.  Tool kits, test equipment, and diagnostic equipment required for performing maintenance tasks are also identified in the MAC.  The  forklift  Repair  Parts  and  Special  Tools  List  (RPSTL),  TM  10-3930-669-24P,  lists  special  tools,  TMDE, and support equipment required to perform maintenance procedures contained in this manual.  Appendix E lists the tools and test equipment required to perform maintenance procedures contained in this manual. 2-2