TM  10-3930-638-24&P 2-56. HYDRAULIC LIFT SYSTEM MAINTENANCE (cont) g. Hydraulic  Reservoir  (cont). (5) Removal and Installation. This task covers removal, cleaning, inspection, and installation/replacement of the  hydraulic  reservoir. INITIAL   SETUP TOOLS EQUIPMENT   CONDITION No. 1 Common Organiza- NSN  4910-00-754-0654 Paragraph Condition Description tional  Maintenance  Tool  Kit Vehicle  parked  on  level  surface,  engine Chain Hoist, 1/4 ton capacity off  and  parking  brake  applied. Shop  Equipment,  Welding NSN  3740-00-357-7268 2-56g(1) Hydraulic  reservoir  drained  and  cover Steam  Cleaning  Equipment removed. 2-56g(2) Hydraulic  oil  filter  assembly  removed. 2-56g(3) Hydraulic  reservoir  strainer  removed. 2-56g(4) Air  breather  and  dipstick  removed. MATERIALS/PARTS 2-53f Front cover plate removed. Cleaning  solvent  P-D-680 2-15h,  step  3 Quick start kit removed. Clean cloths 2-15c, step 4 Air  cleaner  indicator  removed. STEP LOCATION ITEM ACTION REMARKS REMOVAL 1 Hydraulic Five cap screws (1), Remove reservoir,  top lock washers (2), and washers  (3) 2 Hydraulic a. Two cap screws (4), Remove reservoir, lock washers (5), left side and washers (6) b. Two cap screws (7), Remove lock washers (8), and washers (9) 3 Hydraulic a. Two cap screws (10), Remove reservoir, lock washers (11), right  side and  washers  (12) b. Two cap screws (13) Remove lock washers (14), and  washers  (15) 4 Hydraulic a. Four cap screws (16), Remove reservoir. nuts (17), lock bottom washers  (18),  and washers  (19) b. Hydraulic reservoir (20) Remove Pull hydraulic reservoir out just enough to attach chain hoist to it; then remove hydraulic  reservoir 2-451