Removal and Installation - TM-10-3930-638-24-P0503

TM 10-3930-638-24&P

2-56. HYDRAULIC LIFT SYSTEM MAINTENANCE (cont)

g. Hydraulic Reservoir (cont).

(5) Removal and Installation. This task covers removal, cleaning, inspection, and installation/replacement of

the hydraulic reservoir.

INITIAL SETUP

EQUIPMENT CONDITION

TOOLS

Condition Description

Paragraph

No. 1 Common Organiza-

NSN 4910-00-754-0654

Vehicle parked on level surface, engine

tional Maintenance Tool Kit

off and parking brake applied.

Chain Hoist, 1/4 ton capacity

Hydraulic reservoir drained and cover

NSN 3740-00-357-7268

2-56g(1)

Shop Equipment, Welding

removed.

Steam Cleaning Equipment

Hydraulic oil filter assembly removed.

2-56g(2)

Hydraulic reservoir strainer removed.

2-56g(3)

Air breather and dipstick removed.

2-56g(4)

Front cover plate removed.

MATERIALS/PARTS

2-53f

Quick start kit removed.

2-15h, step 3

Cleaning solvent P-D-680

Air cleaner indicator removed.

Clean cloths

2-15c, step 4

REMARKS

ITEM

ACTION

LOCATION

STEP

REMOVAL

Remove

Hydraulic

Five cap screws (1),

lock washers (2), and

reservoir, top

washers (3)

Remove

Hydraulic

a. Two cap screws (4),

reservoir,

lock washers (5),

and washers (6)

left side

Remove

b. Two cap screws (7),

lock washers (8),

and washers (9)

a. Two cap screws (10),

Remove

Hydraulic

lock washers (11),

reservoir,

right side

and washers (12)

Remove

b. Two cap screws (13)

lock washers (14),

and washers (15)

a. Four cap screws (16),

Remove

Hydraulic

reservoir.

nuts (17), lock

washers (18), and

bottom

washers (19)

Pull hydraulic reservoir out just enough

b. Hydraulic reservoir (20) Remove

to attach chain hoist to it; then remove

hydraulic reservoir

2-451