ILLUSTRATED LIST OF MANUFACTURED ITEMS
Section I. INTRODUCTION
This appendix includes complete instructions for making items authorized to be manufactured or fabricated
at the Direct Support and General Support maintenance levels.
Section II. MANUFACTURED ITEMS ILLUSTRATIONS
C-2. MANUFACTURED ITEMS
All bulk materials needed for manufacture of an item are shown on the illustration.
Wear eye shields and protective gloves when fabricating this tool.
Flying metal particles and heated metal may cause serious personal
1. Fabricate from a screwdriver.
2. Heat screwdriver tip and bend as shown.
3. Grind tip to fit notch behind shaft seal.
Figure C-1. Tandem Gear Pump Seal Removal Tool