17-3. ARCTIC HEATER KIT INSTALLATION (CONT)
Ensure that heater inlet hose will not contact engine exhaust manifold or other hot components.
(28) Route heater inlet hose (42) along left-side of
engine, across flywheel housing and under
boom hoist cylinder, along transmission oil
cooler lines, to "COOLANT IN" port of
heater assembly (14).
(29) Connect heater inlet hose (42) to heater inlet
port with hose clamp (45).
(30) Remove 3/4 in. pipe plug (46) at flywheel end
of engine near fuel filter. Discard pipe plug.