17-3. ARCTIC HEATER KIT INSTALLATION (CONT)
Position exhaust tube (15) of heater
assembly (14) down thru hole in heater
mounting bracket (6) and down thru area
between heater mounting bracket and fuel/
hydraulic tank (18). Direct end of exhaust
tube toward lower end of flange of fuel/
Heater is to be installed with hose
connection ports facing inboard on the
Install heater assembly (14) to heater
mounting bracket (6) with four washers (19)
and nuts (20) provided with heater.
If necessary, drill one 5/16 in. hole thru
lower-rear FLANGE of fuel/hydraulic tank
(18). See drilling diagram.
Install exhaust tube (15) on flange of fuel/
hydraulic tank (18) with clamp (21), screw
(22), washer (23), and locknut (24).
Screw end cap (25) on end of exhaust tube