16-18. BOOM EXTEND CYLINDER REPLACEMENT/REPAIR (CONT)
Attach a hoist with sling at front of inner
boom if mounting holes between outer
boom and extend cylinder anchor do not
align. Move inner boom as needed to
align mounting holes.
Install eight screws (12) and locknuts (13)
to secure extend cylinder anchor (14).
Remove wood blocks underneath boom
extend cylinder and inner boom.
Connect hoses (1) to boom extend cylinder
Connect two hoses (1) to two elbows (8).
Install cover (6), four washers (5),
lockwashers (4), and screws (3) on boom
END OF TASK