Remove two wear rings (43) from piston
Do not nick or scratch seal groove on
piston during removal of seal. Failure to
follow this precaution will cause part
Remove seal (45) from piston (44).
Nut may need to be heated with a torch
Remove nut (46) and piston (44) from rod
(39). Discard nut.
Remove preformed packing (47) from
piston (44) bore. Discard preformed packing.
Remove tube (48) and gland (40) from
Remove preformed packings (42 and 49)
and back-up ring (50) from gland (40).
Discard preformed packings.
Do not nick or scratch seal groove inside
gland during removal of seal and rod
wiper. Failure to follow this precaution
will cause part damage.
Note direction that lip of seal is facing to
aid in installation.
(m) Remove seal (51) and rod wiper (52) from
inside of gland (40).
c. Cleaning. See Cleaning Instructions (Para 2-12).
d. Inspection. See Inspection Instructions (Para 2-14).