Quantcast OUTER BOOM REPLACEMENT/REPAIR - continued - TM-10-3930-673-340669

 

Click here to make tpub.com your Home Page

Page Title: OUTER BOOM REPLACEMENT/REPAIR - continued
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
OUTER BOOM REPLACEMENT/REPAIR - continued - TM-10-3930-673-340668
Up
TM-10-3930-673-34 All Terrain Lifter Army System (ATLAS) 10 000 lb Capacity Manual
Next
OUTER BOOM REPLACEMENT/REPAIR - continued - TM-10-3930-673-340670
TM 10-3930-673-34
(19) Carefully remove outer boom (1) from
vehicle frame and lower boom assembly onto
supports.
(20) Remove nut and bolt from top-front of outer
boom (1).
b. Disassembly.
NOTE
Tubes are not interchangeable. Note
location of each tube for use during
installation.
Note location and orientation of clamp
TR01375
halves for use during installation.
(1)
Remove four screws (21), lockwashers (22), two clamp coves (23), four clamp halves (24), and one tube (25)
from outer boom (1). Discard lockwashers.
(2)
Remove six screws (26), lockwashers (27), two clamp covers (28), four clamp halves (29), and two tubes (25)
from outer boom (1). Discard lockwashers.
c. Cleaning. See Cleaning Instructions (Para 2-12).
d. Inspection. See Inspection Instructions (Para 2-14).
e. Assembly.
NOTE
Lines are not interchangeable. Install lines in locations noted during removal.
(1)
Position three tubes (25) on underside of outer boom (1).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are
harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in a well-
ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water.
(2)
Apply sealing compound to threads of six screws (26).
(3)
Position one line (25). Install four clamp halves (23), two clamp covers (28), six lockwashers (27), and screws
(26) on outer boom (1).
(4)
Apply sealing compound to threads of four screws (21).
(5)
Position two lines (25). Install four clamps halves (24), two clamp covers (23), four lockwashers (22), and
screws (21) on outer boom (1).
Change 1
16-81

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.