16-8. FRAME TILT VALVE REPAIR (CONT)
Install bushing (3) on shaft (14).
Use pliers to install spring (2) on
Install hub (1) on cap (4).
Assemble frame tilt valve parts (4
Install bearing race (15) and
bearing (16) on cap (4).
Install stop plate (17) on cap (4).
Ensure that stop pin (20) is
centered in wide gap of stop plate.
Install disk assembly (13) on
shaft (14). The side of disk assembly
with holes drilled through it must
face away from cap (4). Ensure that
one of two holes drilled on outer
surface of disk assembly align with
stop pin (20).
Install washer (12) on shaft (14).