Install two preformed packings (11) and preformed packings (10) on cap (9). Ensure that back-
up rings (12) are correctly positioned.
Install spring (7), plunger (8), and seat (9) in cap (4).
Install cap (9) in body (20). Ensure that spring (13) is positioned over seat (8).
Install screw (3) using the same number of turns as was noted during removal.
Install jam nut (1) and tighten to hold setting.
Install two preformed packings (6) with sealing washers (5).
Hold jam nut (1) in position and install acorn nut (2) on screw (3).
Follow-on Maintenance: Install frame tilt/brakes relief valve (TM 10-3930-673-20).
END OF TASK