Quantcast TANDEM GEAR PUMP REPAIR - continued - TM-10-3930-673-340590

 

Click here to make tpub.com your Home Page

Page Title: TANDEM GEAR PUMP REPAIR - continued
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
TANDEM GEAR PUMP REPAIR - continued - TM-10-3930-673-340589
Up
TM-10-3930-673-34 All Terrain Lifter Army System (ATLAS) 10 000 lb Capacity Manual
Next
TANDEM GEAR PUMP REPAIR - continued - TM-10-3930-673-340591
TM 10-3930-673-34
16-3. TANDEM GEAR PUMP REPAIR (CONT)
(4)
Install gear housing (2) on bearing
3
13
carrier (3), gears (9 and 10), and
thrust plate (6).
12
11
(a)
If removed, install dowel pins (15)
9
6
in cover (1) and housing (2).
7
8
(b)
Apply grease on two seals (14).
Install seals into grooves on gear
housing (2).
10
CAUTION
4
15
5
If parts are difficult to fit during
assembly, tap with a soft hammer.
Use care to prevent part damage.
14
(c)
Ensure that dowel pins (15) are in
place. Install gear housing (2) onto
1
14
bearing carrier (3). Align dowel
holes over dowel pins. Use a soft
15
hammer to tap parts together. Use
2
care to prevent damage to
TR01297
seals (14).
(d)
Install seals (12 and 13) in thrust plate (11) with flat side of seal facing away from thrust
plate.
(e)
Install drive gear (9) and driven gear (10) into bearing carrier (3). Ensure that gears are in
contact with thrust plate (11) face.
(f)
Install seals (7) and (8) into grooves in thrust plate (6) with flat side of seal facing away from
thrust plate.
(g)
Install thrust plate (6) over gears (9 and 10). The flat side of seal (8) should be facing up with
relief groove facing outlet side.
(5)
Install cover (1) on gear housing (2).
CAUTION
If parts are difficult to fit during assembly, tap with a soft hammer. Use care to prevent
part damage.
(a)
Ensure that dowel pins (15) are in place. Install cover (1) onto gear housing (2). Align dowel
holes over dowel pins. Use a soft hammer to tap parts together. Use care to prevent damage to
seals (14).
16-14

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.