 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-673-34
12
This Task Covers:
a. Disassembly
b. Assembly
INITIAL SETUP
Equipment Condition
Tools and Special Tools
Emergency steering pump removed
Shop Equipment, Automotive Maintenance and
(TM 10-3930-673-20)
Repair, Common No. 1 Less Power
(Item 16, Appendix D)
Materials/Parts
Gasket
a. Disassembly.
6
NOTE
5
The motor, pump/motor endhead,
3
and pump assemblies are not
2
repairable. Each must be replaced
as an assembly.
11
12
(1)
Remove two screws (1) and
pump assembly (2) from pump/
motor endhead (3).
1
10
(2)
Remove four screws (4), pump/
9
motor endhead (3), and
8
gasket (5) from motor
7
assembly (6). Discard gasket.
4
1
(3)
If damaged, remove relief valve
TR01308
cap (7), screw (8), spring (9),
and ball (10) from pump
assembly (2).
(4)
If damaged, remove check valve plug (11), and spring (12) from pump assembly (2).
b. Assembly.
(1)
If removed, install spring (12) and check valve plug (11) in pump assembly (2).
(2)
If removed, install ball (10), spring (9), screw (8), and relief valve cap (7) in pump
assembly (2).
(3)
Install gasket (5), pump/motor endhead (3) and four screws (4) on motor assembly (6).
(4)
Install two screws (1) and pump assembly (2) on pump/motor endhead (3).
NOTE
Follow-on Maintenance: Install emergency steering pump (TM 10-3930-673-20).
END OF TASK
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals